JinkoSolar's N-type modules utilizing Tunnel Oxide Passivating Contacts (TOPCon) technology exhibit lower LID/LeTID degradation and superior low-light performance. The dual-sided power generation gain increases with backside light exposure, significantly reducing LCOE. The overall modules have passed certification with a maximum front-side test static load of 5400pa and a maximum back-side test static load of 2400pa. With superior light utilization and current collection capabilities, the product's power output and reliability are effectively enhanced. The attenuation probability caused by the PID phenomenon is minimized through optimization of battery production technology and material control.
Electrical performance parameters(STC)
|
Parameter |
parameter value |
|
Max. Power(W) |
720 |
|
Max. Power Voltage(V) |
40.89 |
|
Maxi. Power Current(A) |
17.61 |
|
Open Circuit Voltage(V) |
49.04 |
|
Short Circuit Current(A) |
18.67 |
|
Module Efficiency(%) |
23.2 |
|
Power Tolerance |
0~+3% |
|
Temperature Coefficient of Pmax |
-0.29%/℃ |
|
Temperature Coefficient of Voc |
-0.25%/℃ |
|
Temperature Coefficient of Isc |
0.045%/℃ |
STC:Irradiance of 1000W/㎡, cell temperature of 25℃, and air mass 1.5 (AM1.5)
It is widely used in many fields like the following:
Suitable for large-scale projects occupying desert and plain areas, high power can reduce the number of components and the amount of installation supports, thereby lowering construction and land costs. When used with tracking supports, it maximizes light absorption, enhances the overall power generation capacity of the power station, and meets the grid connection requirements of large-scale energy projects.
Suitable for large-scale standard factory buildings and logistics park roofs, high-power systems can achieve higher installed capacity within a limited roof area. They meet the electricity needs of enterprises, reduce electricity expenses, and generate revenue by selling excess power to the grid, fitting the energy conservation and emission reduction needs of industrial and commercial sectors.
For water scenarios such as lakes and reservoirs, high-power components can reduce the deployment density of floating supports, thereby easing underwater construction.
The dual-sided power generation characteristic, combined with water surface reflection, further enhances the power generation efficiency, making it suitable for large-scale aquatic clean energy projects.
Off-grid power stations in remote areas, such as mines and islands, can reduce the pressure on supporting energy storage equipment with high power, ensuring stable power supply.
The agricultural photovoltaic greenhouse project integrates power generation and agricultural production within a limited space, enhancing the comprehensive utilization rate of land.
Product application
Feature of Jinko Solar Panel
Outstanding power generation efficiency
high power and high conversion efficiency, high gain from dual-sided power generation, and good low-light response performance; it can generate an additional 3%-5% power gain compared to conventional dual-sided solar panels.
Strong environmental adaptability
excellent high temperature resistance, UV resistance and attenuation resistance, and tolerance to harsh environments; even in high temperature environments where the surface temperature exceeds 60°C in summer, or in areas with a temperature difference of more than 20°C between day and night, it can reduce power loss and maintain stable power output.
Reliable performance
The structure and craftsmanship are reliable, and the quality meets international standards. The yield rate exceeds 99.7%, meeting multiple international standards such as TUV, IEC61215, and IEC61730. Additionally, it possesses resistance to PID (Potential Induced Degradation) and other properties, significantly reducing the probability of later failures.
Excellent economy and adaptability
low cost per kWh and flexible adaptation to all scenarios. Tiger Neo components can reduce the cost per kWh by more than 6%; the installation site is flexible, suitable for conventional scenarios such as ground power stations and industrial and commercial rooftops, and can also adapt to special scenarios such as large sandy desert bases, plateaus, and offshore areas.
Production of Jinko Solar Panel
Our Service
- WE guarantee that we will reply your inquiry/email ASAP.
- WE guarantee that you will get higher-quality products from us.
- WE guarantee that Samples will be sent to you at the earliest.
- WE guarantee that you will be served professionally and efficiently.
- WE guarantee that the products will be delivered ASAP
- WE guarantee that customized requirements will be accepted.
Why choose us?
1. 15years experience.
2. Ensure the products meet the quality standards.
3. Ensure the goods will be delivered on time.
4. We will reply you within 24 hours.
5. Provide warm and friendly service and after-sale service.
6. Guaranteed the good quality and best service, as you buy from local supplier.
7.. Customized specifications are welcome.
FAQ
Q:What's the delivery time?
A: Within 20 days after deposit.
Q: What's the payment terms?
A: T/T 30% deposit, balanced before shipment.
Q: Are you factory or trading company?
A: We're factory, and can do exporting ourselves and trading others if you want JINKO.
Q:How's your capacity in your workshop?
A: We operate multiple production lines, featuring high production efficiency, fast delivery speed, guaranteed quality, and customizable services available.
Packing & Shipping
Hot Tags: jinko solar panel 720w, China jinko solar panel 720w manufacturers, suppliers, factory, Jinko Solar Panel 720W, solar panels, Solar Panel Kits, Bifacial Solar Panels All Black, 610w Solar Panel, 550W Solar Panel